Skip to content

Race Track Lights and Busch Lite Nights (ULTRA SOFT DTF)

$3.00
HOW TO APPLY:

Ultra Soft Direct to Film PRESSING INSTRUCTIONS

Direct to Film or Dream Print Transfers may be applied to any combination of polyester/cotton, including 100% cotton.  These are a water based formula instead of a chemical based formula.  Which means they are better for the environment and have a softer feel once pressed.

* A HEAT GUN WILL TELL YOU IF YOUR PRESS IS ACCURATE *

Every Heat Press is different, temps and pressure are not always accurate or even so adjusting for your individual press is necessary, we highly recommend a heat gun. WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.

ULTRA SOFT DIRECT TO FILM ***ONE PRESS*** FORMULA

  • Press at 265-270 degrees;
  • HEAVY PRESSURE 60-70 PSI.
  • Pre-press for 7 seconds to remove wrinkles and moisture;
  • Press for 7-10 seconds; WARM PEEL.
  • Allow transfer to COOL SLIGHTLY before removing clear film
  • Wait 24 hours before washing or stretching.
  • ****** IMPORTANT NOTICE ******  If you spray any product that contains any form of acetone on your design, it will distort the design.  This includes products with DEET.

* A HEAT GUN WILL TELL YOU IF YOUR PRESS IS ACCURATE *

Select Size
Select Type